| Product name | IFL - M18 |
| Standards | IEC/EN 60947-5-2 , DIN VDE 0660-208 |
| Housing construction form | Cylinder, thread |
| Installation conditions (mechanical) | flush |
| Enclosure material | Brass |
| Enclosure coating material | nickel-plated |
| Active area | Plastic |
| Material of the nuts | Brass |
| Gross weight | 110 g |
| Product type description | IFL 5-18M-10P |
| Article number (order number) | 101083092 |
| EAN (European Article Number) | 4030661018430 |
| [email protected] number, Version 9.0 | 27-27-01-01 |
| Certificates | CCC |
| Product name | IFL - M18 |
| Standards | IEC/EN 60947-5-2 , DIN VDE 0660-208 |
| Housing construction form | Cylinder, thread |
| Installation conditions (mechanical) | flush |
| Enclosure material | Brass |
| Enclosure coating material | nickel-plated |
| Active area | Plastic |
| Material of the nuts | Brass |
| Gross weight | 110 g |
| Integral System Diagnostics, status | Yes |
| Number of cable wires | 3 |
| Switch distance | 5 mm |
| Tightening torque of nuts, maximum | 18 Nm |
| Terminal Connector | Cable |
| Length of cable | 2 m |
| Wire cross-section | 0.34 mm2 |
| Material of the Cable mantle | PVC |
| ISO thread of the sensor | M18 |
| width across flats | 24 BK |
| Length of sensor | 36 mm |
| Protection class | IP 67 to IEC/EN 60529 |
| Ambient temperature, minimum | -25 °C |
| Ambient temperature, maximum | +70 °C |
| Voltage type | DC (direct current) |
| Operating voltage, minimum | 10 V |
| Operating voltage, maximum | 30 V |
| No-load current | 3.4 mA |
| Operating current | 200 mA |
| Switching element | Normally open contact (NO) |
| Protection circuit integrated | inductive interference protection , Protection against polarity reversal , Surge protection , Max. fuse rating |
| Switching frequency, approx. | 700 Hz |
| Versions | p-type |
| Note (Integral System Diagnostics, status ) | yellow LED |
| Note (General) | Instead of nuts, a mounting clamp can be provided. |
