| Product name | RSS 36 |
| Standards | IEC 60947-5-3 |
| general information | Individual coding, multiple teaching , High |
| Active principle | RFID |
| Housing construction form | Block |
| Installation conditions (mechanical) | not flush |
| Sensor topology | Sensor for series wiring |
| Enclosure material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Active area | Glass-fibre, reinforced thermoplastic |
| Gross weight | 100 g |
| Time to readiness, maximum | 2,000 ms |
| Reaction time, maximum | 100 ms |
| Duration of risk, maximum | 200 ms |
| Product type description | RSS 36-I2-D-R-ST |
| Article number (order number) | 101214773 |
| EAN (European Article Number) | 4030661413396 |
| [email protected] number, Version 9.0 | 27-27-24-03 |
| Certificates | TÜV , cULus , ECOLAB , EAC , FCC , IC |
| Product name | RSS 36 |
| Standards | IEC 60947-5-3 |
| general information | Individual coding, multiple teaching , High |
| Active principle | RFID |
| Housing construction form | Block |
| Installation conditions (mechanical) | not flush |
| Sensor topology | Sensor for series wiring |
| Enclosure material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Active area | Glass-fibre, reinforced thermoplastic |
| Gross weight | 100 g |
| Time to readiness, maximum | 2,000 ms |
| Reaction time, maximum | 100 ms |
| Duration of risk, maximum | 200 ms |
| Latching | Yes |
| Diagnostic output | Yes |
| Short circuit detection | Yes |
| Short-circuit recognition | Yes |
| Safety functions | Yes |
| Cascadable | Yes |
| Integral System Diagnostics, status | Yes |
| Number of LEDs | 3 |
| Number of semi-conductor outputs with signaling function | 1 |
| Number of fail-safe digital outputs | 2 |
| Standards | ISO 13849-1 , IEC 60947-5-3 , EN 62061 , IEC 61508 |
| Performance Level | e |
| Control category to EN13849 | 4 |
| PFH-value | 2.70 x 10⁻¹⁰ /h |
| Safety Integrity Level (SIL) | 3 |
| Mission Time | 20 Year(s) |
| Actuating panels | lateral |
| Active area | lateral |
| Mounting | A screw length of 25 mm is sufficient for sensor mounting and for side mounting of the actuators. 30 mm long screws are recommended when the actuator is mounted upright and/or when the sealing discs are used. |
| Switch distance | 12 mm |
| Ensured switch distance "ON" Sao | 10 mm |
| Ensured switch distance "OFF" Sar | 20 mm |
| Hysteresis (Switch distance), maximum | 2 mm |
| Repeat accuracy R R | 0.5 mm |
| Note (Repeat accuracy R) | Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle).Minimum clearance between two sensor systems 100 mm. |
| Latching force | 18 N |
| Terminal Connector | Connector M12, 8-pole |
| Note | The cable section of the interconnecting cable must be observed! Cable length and cable section alter the voltage drop depending on the output current |
| Height of sensor | 25 mm |
| Length of sensor | 22 mm |
| Width of sensor | 106.3 mm |
| Protection class | IP 65 to IEC/EN 60529 , IP 67 to IEC/EN 60529 , IP 69 to IEC/EN 60529 |
| Ambient temperature, minimum | -25 °C |
| Ambient temperature, maximum | +70 °C |
| Storage and transport temperature, minimum | -25 °C |
| Storage and transport temperature, maximum | +85 °C |
| Material temperature resistance of the cable (in motion), minimum | -10 °C |
| Material temperature resistance of the cable (at rest), minimum | -30 °C |
| Material temperature resistance (long-term), maximum | +105 °C |
| Resistance to vibrations to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
| Rated impulse withstand voltage | 0.8 kV |
| Degree of pollution to VDE 0100 | 3 |
| Voltage type | DC (direct current) |
| No-load current | 100 mA |
| Rated operating voltage | 24 VDC −15 % / +10 % |
| Rated operating voltage minimum | 20.4 VDC |
| Rated operating voltage maximum | 26.4 VDC |
| Operating current | 600 mA |
| Required rated short-circuit current to EN 60947-5-1 | 100 A |
| Switching frequency approx. | 1 Hz |
| Rated operating current (safety outputs) | 250 mA |
| Output current (fail-safe output) maximum | 0.25 A, P-type , 1 V |
| Current leakage | 0.5 mA |
| Note (LED switching conditions display) | LED yellow: Operating condition , LED green: Supply voltage , LED red: Fault |
| PIN 1 | A1 Ue Brown |
| PIN 2 | X1 Safety input 1 White |
| PIN 3 | A2 GND Blue |
| PIN 4 | Y1 Safety output 1 Black |
| PIN 5 | OUT Diagnostic output OUT Grey |
| PIN 6 | X2 Safety input 2 violet |
| PIN 7 | Y2 Safety output 2 red |
| PIN 8 | IN without function Pink |
| Included in delivery | Actuators must be ordered separately. |
| Recommendation (actuator) | RST 36-1 , RST 36-1-R , PROTECT PSC1 , SRB-E-301ST , SRB-E-201LC |
| Note (General) | Teaching of the individual coding of a RST actuator through a simple routine during start-up (as -I1). A protected coding process enables teaching a new actuator in case of maintenance.""}]" |
