| Product name | RSS16 |
| Standards | IEC 60947-5-3 |
| general information | Universal coding , Low |
| Active principle | RFID |
| Housing construction form | Block |
| Installation conditions (mechanical) | not flush |
| Sensor topology | Sensor for series wiring |
| Enclosure material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Active area | Glass-fibre, reinforced thermoplastic |
| Gross weight | 250 g |
| Time to readiness, maximum | 2,000 ms |
| Reaction time, maximum | 100 ms |
| Duration of risk, maximum | 200 ms |
| Product type description | RSS16-D-SK |
| Article number (order number) | 103004343 |
| EAN (European Article Number) | 4030661456881 |
| [email protected] number, Version 9.0 | 27-27-24-03 |
| Certificates | TÜV , cULus , EAC , FCC , IC |
| Product name | RSS16 |
| Standards | IEC 60947-5-3 |
| general information | Universal coding , Low |
| Active principle | RFID |
| Housing construction form | Block |
| Installation conditions (mechanical) | not flush |
| Sensor topology | Sensor for series wiring |
| Enclosure material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Active area | Glass-fibre, reinforced thermoplastic |
| Gross weight | 250 g |
| Time to readiness, maximum | 2,000 ms |
| Reaction time, maximum | 100 ms |
| Duration of risk, maximum | 200 ms |
| Diagnostic output | Yes |
| Short circuit detection | Yes |
| Short-circuit recognition | Yes |
| Series-wiring | Yes |
| Safety functions | Yes |
| Cascadable | Yes |
| Integral System Diagnostics, status | Yes |
| Number of LEDs | 2 |
| Number of semi-conductor outputs with signaling function | 1 |
| Number of fail-safe digital outputs | 2 |
| Standards | ISO 13849-1 , IEC 60947-5-3 , EN 62061 , IEC 61508 |
| Performance Level | e |
| Control category to EN13849 | 4 |
| PFH-value | 6.30 x 10⁻¹¹ /h |
| Safety Integrity Level (SIL) | 3 |
| Mission Time | 20 Year(s) |
| Actuating panels | front side , rear , from head |
| Active area | lateral , front side , cover-side |
| Mounting | 2 x M5, Cylinder head screw |
| Switch distance | 15 mm |
| Ensured switch distance "ON" Sao | 12 mm |
| Ensured switch distance "OFF" Sar | 30 mm |
| Hysteresis (Switch distance), maximum | 2 mm |
| Repeat accuracy R R | 0.5 mm |
| Tightening torque of nuts, maximum | 2 Nm |
| Terminal Connector | Screw connection |
| Note | The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current |
| Height of sensor | 30 mm |
| Length of sensor | 91 mm |
| Width of sensor | 52 mm |
| Protection class | IP 65 to IEC/EN 60529 , IP 67 to IEC/EN 60529 |
| Ambient temperature, minimum | -25 °C |
| Ambient temperature, maximum | +70 °C |
| Storage and transport temperature, minimum | -25 °C |
| Storage and transport temperature, maximum | +85 °C |
| Restistance to shock | 30 g / 11 ms |
| Rated impulse withstand voltage | 0.8 kV |
| Degree of pollution to VDE 0100 | 3 |
| Voltage type | DC (direct current) |
| No-load current | 100 mA |
| Rated operating voltage, minimum | 20.4 VDC |
| Rated operating voltage, maximum | 26.4 VDC |
| Operating current | 2,100 mA |
| Required rated short-circuit current to EN 60947-5-1 | 100 A |
| Switching frequency, approx. | 1 Hz |
| Rated operating current (safety outputs) | 1,000 mA |
| Output current (fail-safe output) maximum | 1 A, P-type , 1 V |
| Current leakage | 0.5 mA |
| Operating current (diagnostic output) | 50 mA, P-type , 2 V |
| Note (LED switching conditions display) | Multi-coloured LED: Green Red , LED yellow: Operating condition , LED green: Supply voltage , LED red: Fault |
| Included in delivery | Actuators must be ordered separately. |
| Recommendation (actuator) | RST16-1 , RST-U-2 , PROTECT PSC1 , SRB-E-301ST , SRB-E-201LC""}]" |
