| Product name | AZM 300 |
| Standards | ISO 13849-1 , IEC 61508 , IEC 60947-5-3 , ISO 14119 , IEC 62061 |
| general information | Individual coding, multiple teaching , High |
| Active principle | RFID |
| Enclosure material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Gross weight | 645.9 g |
| Time to readiness, maximum | 5,000 ms |
| Duration of risk, maximum | 200 ms |
| Product type description | AZM300B-I2-ST-SD2P-T |
| Article number (order number) | 103008179 |
| EAN (European Article Number) | 4030661452203 |
| [email protected] number, Version 9.0 | 27-27-26-03 |
| Certificates | TÜV , cULus , ECOLAB , EAC , FCC |
| Product name | AZM 300 |
| Standards | ISO 13849-1 , IEC 61508 , IEC 60947-5-3 , ISO 14119 , IEC 62061 |
| general information | Individual coding, multiple teaching , High |
| Active principle | RFID |
| Enclosure material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Gross weight | 645.9 g |
| Time to readiness, maximum | 5,000 ms |
| Duration of risk, maximum | 200 ms |
| Power to unlock | Yes |
| Actuator monitored | Yes |
| Serial diagnostics | Yes |
| Latching | Yes |
| Emergency exit | Yes |
| Short circuit detection | Yes |
| Short-circuit recognition | Yes |
| Series-wiring | Yes |
| Safety functions | Yes |
| Integral System Diagnostics, status | Yes |
| Number of safety contacts | 2 |
| Standards | ISO 13849-1 , IEC 62061 , IEC 61508 |
| Performance Level | e |
| Control category | 4 |
| PFH-value | 5.20 x 10⁻¹⁰ /h |
| PFD value | 4.50 x 10⁻⁵ |
| Safety Integrity Level (SIL) | 3 |
| Mission Time | 20 Year(s) |
| Mechanical life, minimum | 1,000,000 Operations |
| Note (Mechanical lifetime) | When using a door hinge > 50,000 operations with door weights ≤ 5 kg;actuating speed ≤ 0.5 m/s |
| Switch distance | 2 mm |
| Ensured switch distance "ON" Sao | 1 mm |
| Ensured switch distance "OFF" Sar | 20 mm |
| Clamping force in accordance with ISO14119 Fzh | 1,150 N |
| Clamping force, maximum Fmax | 1,500 N |
| Latching force | 25 N, 50 N |
| Tightening torque of the fixing screws, minimum | 6 Nm |
| Tightening torque of the fixing screws, maximum | 7 Nm |
| Terminal Connector | Connector M12, 8-pole, A-coded |
| Height of sensor | 126 mm |
| Length of sensor | 35 mm |
| Width of sensor | 85 mm |
| Protection class | IP66 to IEC 60529 , IP67 to IEC 60529 , IP69 to IEC 60529 |
| Ambient temperature, minimum | +0 °C |
| Ambient temperature, maximum | +60 °C |
| Storage and transport temperature, minimum | -10 °C |
| Storage and transport temperature, maximum | +90 °C |
| Resistance to vibrations to EN 60068-2-6 | 10 … 150 Hz, amplitude 0.35 mm |
| Restistance to shock | 30 g / 11 ms |
| Rated impulse withstand voltage | 0.8 kV |
| Degree of pollution to VDE 0100 | 3 |
| Operating voltage, minimum | 20.4 VDC |
| Operating voltage, maximum | 26.4 VDC |
| No-load current | 100 mA |
| Required rated short-circuit current to EN 60947-5-1 | 100 A |
| Reaction time of actuator, maximum | 100 ms |
| Reaction time of input, maximum | 0.5 ms |
| Switching frequency, maximum | 0.5 Hz |
| Note | Cable length and cable section alter the voltage drop depending on the output current |
| Switching thresholds of magnet inputs | -3 V … 5 V (Low) , 15 V … 30 V (High) , C0 , C1 , C2 , C3 |
| Switching thresholds of fail-safe inputs | −3 V … 5 V (Low) , 15 V … 30 V (High) |
| Current consumption of the safety inputs at 24V | 5 mA, C1 , C1 , C2 , C3 |
| Rated operating current (safety outputs) | 250 mA, 4 V |
| Current leakage | 0.5 mA, C2 , C1 , C2 |
| Diagnostic output | short-circuit proof p-type , 4 V |
| Note (LED switching conditions display) | Operating condition: LED green , Error / functional defect: LED red , Supply voltage UB: LED green |
| PIN 1 | A1 Supply voltage UB |
| PIN 2 | X1 Safety input 1 |
| PIN 3 | A2 GND |
| PIN 4 | Y1 Safety output 1 |
| PIN 5 | OUT serial diagnostic output |
| PIN 6 | X2 Safety input 2 |
| PIN 7 | Y2 Safety output 2 |
| PIN 8 | IN serial diagnostic input |
| Included in delivery | Actuators must be ordered separately. |
| Recommendation (actuator) | AZ/AZM300-B1 |
| Note (General) | For doors that are flush with the door frame the optional mounting plate MP-AZ/AZM300-1 can be used. , For glass and Makrolon doors the optional mounting kit MS-AZ/AZM300-B1-1 can be used. , As long as the actuating unit remains inserted in the solenoid interlock the unlocked safety guard can be relocked. In this case the safety outputs are re-enabled so that the safety guard must not be opened.""}]" |
